Ip Https Authentication; Show Authentication Methods - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

ip https authentication

The
ip https authentication
authentication methods for HTTPS server users. To return to the default
configuration, use the
Syntax
ip https authentication
no ip https authentication
Parameters
• method1 [method2...] — Specify at least one from the following table:
Keyword
local
none
radius
tacacs
Default Setting
The local user database is checked. This has the same effect as the command
ip https authentication
Command Mode
Global Configuration mode
Command Usage
The additional methods of authentication are used only if the previous method
returns an error, not if it fails. To ensure that the authentication succeeds even
if all methods return an error, specify
command line.
Example
The following example configures HTTPS authentication.
Console(config)#
Related Commands

show authentication methods

show authentication methods
The
show authentication methods
information about the authentication methods.
Syntax
show authentication methods
294
Global Configuration mode command specifies
form of this command.
no
method1 [method2...]
Source or destination
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
local.
ip https authentication radius local
Privileged EXEC mode command displays
as the final method in the
none