Logging Console - Alcatel OmniStack LS 6248 User Manual

values:
local0, local1, local2, local3, local4, local5, local 6, local7
• text — Syslog server description. (Range: 1-64 characters)
Default Setting
The default port number is 514.
The default logging message level is
The default facility is local7.
Command Mode
Global Configuration mode
Command Usage
Up to 8 syslog servers can be used.
If no specific severity level is specified, the global values apply to each server.
Example
The following example limits logged messages sent to the syslog server with IP
address 10.1.1.1 to severity level
Console(config)# logging 10.1.1.1 severity
Related Commands
show logging

logging console

The
logging console
to the console based on severity. To disable logging to the console, use the
of this command.
Syntax
logging console
no logging console
Parameters
• level — Specifies the severity level of logged messages displayed on the
console. Possible values:
notifications, informational, debugging.
Default Setting
The default severity level is
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
critical
Global Configuration mode command limits messages logged
level
emergencies, alerts
informational
.
informational
.
critical
,
critical
.
Syslog Commands
.
form
no
,
errors, warnings
593
4
,