- group — Group number of group of protocols associated together.
(Range: 1 – 2147483647)
- encapsulation — Currently the protocol "ethernet" is supported. If no option
is indicated the default is "ethernet".
Default Setting
There are no default settings for this command.
Command Mode
VLAN Configuration mode
Command Usage
The following protocol names are reserved for Ethernet Encapsulation:
- ip-arp
- ipx
- ip
Example
The following example maps a protocol 0x0000 to protocol group 1000 for Ethernet
port 1/e16 .
Console(config-vlan)# map protocol 0x000 ethernet protocols-group 1000
Console(config-if)# switchport mode
Related Commands
vlan database
vlan
show vlan
switchport general map protocols-group vlan
The
switchport general map protocols-group vlan
configuration command sets a protocol-based classification rule. Use the
this command to delete a classification.
Syntax
switchport general map protocols-group
no switchport general map protocols-group
Parameters
- group — Group number as defined in the map protocol to protocols-group.
(Range: 1 - 65535)
- vlan-id — Define the VLAN ID in the classifying rule.
Default Setting
There are no default settings for this command.
access
classification-rules interface
group
vlan
vlan-id
group
4
VLAN Commands
form of
no
667