Configuring Protocol Based Vlan Groups; Figure 3-106. Subnet-Based Groups Page - Alcatel OmniStack LS 6248 User Manual

• Remove — If checked, deletes the Subnet-Based VLAN Group.
Web – Click Layer 2, VLAN, VLAN Groups, Subnet-based Groups. Define the fields
and click Apply.
CLI – The following is an example of the CLI commands used to create IP Based
VLAN groups:
console(config)# vlan database
console(config-vlan)# map protocol ethernet protocols-group 2000

Configuring Protocol Based VLAN Groups

The Protocol Based Groups Page contains information regarding protocol names
and the VLAN Ethernet type. Interfaces can be classified as a specific protocol
based interface. The classification places the interface into a protocol group.
Command Attributes
• Protocol Value — User-defined protocol value.
• Group ID – Defines the IP based VLAN ID. The possible field range is 1 -
2147483647.
• Remove — If checked, deletes the Protocol Based VLAN Group.
Web – Click Layer 2, VLAN, VLAN Groups, Protocol-based Groups. Define the
fields and click Apply.

Figure 3-106. Subnet-Based Groups Page

Defining VLAN Groups
4-662
4-666
3
215