• Remove— Removes a RADIUS server. The possible field values are:
• Checked — Removes the selected RADIUS server.
• Unchecked — Maintains the RADIUS servers.
Web – Click System, WebViewMgmt, Authentication, RADIUS, define the fields, and
click Apply.
CLI – The following is an example of the RADIUS CLI Commands:
Console(config)# radius-server host 192.168.10.1 auth-port 20 timeout 20
4-495
Console(config)# radius-server key alcatel-server
4-497
console(config)# radius-server retransmit 5
4-497
console(config)# radius-server source-ip 10.1.1.1
4-498
Console(config)# radius-server timeout 5
4-499
Console(config)# radius-server deadtime 10
4-500
Figure 3-49. RADIUS Page
Configuring Authentication Methods
3
117