Set Interface Active; Show Interfaces Advertise - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
In the following example, the counters for interface 1/e1 are cleared.
clear counters ethernet
Console>
Related Commands
shutdown

set interface active

The
set interface active
that was shutdown.
Syntax
set interface active
Parameters
• interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
This command is used to activate interfaces that were configured to be active,
but were shutdown by the system for some reason (e.g.,
Example
The following example reactivates interface 1/e5.
Console# set interface active ethernet 1/e5
Related Commands
show interfaces status

show interfaces advertise

The show interfaces advertise
autonegotiation data.
386
1/e1
Privileged EXEC mode command reactivates an interface
{ interface |
ethernet
Privileged EXEC mode command displays
port-channel-number}
port-channel
port security)
.