4
Command Line Interface
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
If an IP address is not configured by this command, and no IP address is
configured for the IGMP querier VLAN interface, the querier would be
disabled.
ip igmp snooping querier version
The ip igmp snooping querier version Interface Configuration (VLAN) mode
command configures the IGMP version of an IGMP querier on a specific VLAN. Use
the no form of this command to return to default.
Syntax
ip igmp snooping querier version {2 | 3}
no ip igmp snooping querier version
Parameters
• 2 — Specify that the IGMP version would be IGMPv2.
• 3 — Specify that the IGMP version would be IGMPv3.
Default Configuration
The default value is IGMPv3.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
If the IGMP querier is configured to IGMPv3, the querier would try to work in
IGMPv3. In case the hosts do not support IGMPv3, the querier version would
be downgraded.
If the IGMP querier is configured to IGMPv2, the querier would attempt to work
in IGMPv2. It can be downgraded automatically to IGMPv1, but cannot be
upgraded automatically to IGMPv3.
show ip igmp snooping mrouter
The
show ip igmp snooping mrouter
information on dynamically learned multicast device interfaces.
Syntax
show ip igmp snooping mrouter
Parameters
• vlan-id — VLAN number.
Default Setting
This command has no default configuration.
414
User EXEC mode command displays
[
vlan-id]
interface