Alcatel OmniStack LS 6248 User Manual page 232

3
Configuring the Switch
information about VLAN groups used on this switch to external network devices, you
must specify a VLAN ID for each of these groups. The Current Table Page contains
parameters for defining VLAN groups:
Command Attributes
• Unit No. — Indicates the stacking member for which the Current Table information
is displayed.
• VLAN ID — Displays the user-defined VLAN ID.
• VLAN Name — Displays the name of the VLAN.
• VLAN Type — Indicates the VLAN type. The possible field values are:
• Dynamic — The VLAN was dynamically created through GARP.
• Static — The VLAN is user-defined.
• Default — The VLAN is the default VLAN.
• Port/LAG — Indicates the port or LAG membership status of the VLAN. The
possible values are:
• Untagged (Brown) — Indicates the interface is an untagged VLAN member.
Packets forwarded by the interface are untagged.
• Tagged (Red) — Indicates the interface is a tagged member of a VLAN. All
packets forwarded by the interface are tagged. The packets contain VLAN
information.
• Exclude (Gray) — Excludes the interface from the VLAN. However, the interface
can be added to the VLAN through GARP.
• Forbidden (Purple) — Denies the interface VLAN membership, even if GARP
indicates the port is to be added.
Web – Click Layer 2, VLAN, VLAN, Current Table. Define the VLAN ID, VLAN
Name, and VLAN type fields. and define the port settings, and click Apply.
208