Advanced Features; Dot1X Auth-Not-Req - Alcatel OmniStack LS 6248 User Manual

InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout

ADVANCED FEATURES

dot1x auth-not-req

The
dot1x auth-not-req
unauthorized devices access to the VLAN. To disable access to the VLAN, use the
form of this command.
no
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Default Configuration
Access is enabled.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
An access port cannot be a member in an unauthenticated VLAN.
The native VLAN of a trunk port cannot be an unauthenticated VLAN.
For a general port, the PVID can be an unauthenticated VLAN (although only
tagged packets would be accepted in the unauthorized state.)
The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not
recognized.
The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body Length
field is invalid.
The protocol version number carried in the most recently
received EAPOL frame.
The source MAC address carried in the most recently
received EAPOL frame.
Interface Configuration mode command enables
802.1x Commands
281
4