History; History Size - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command Usage
To specify no timeout, enter the
Example
The following example configures the interval that the system waits until user input is
detected to 20 minutes.
Console(config)#
Console(config-line)#
Related Commands
show line

history

The history Line Configuration mode command enables the command history
function. To disable the command history function, use the
Syntax
history
no history
Default Setting
The command history function is enabled.
Command Mode
Line Configuration mode
Command Usage
This command enables the command history function for a specified line. To
enable or disable the command history function for the current terminal
session, use the
Example
The following example enables the command history function for telnet.
Console(config)# line telnet
Console(config-line)# history
Related Commands

history size

show history
show line
history size
The Line Configuration mode command configures the command
history size
history buffer size for a particular line. To reset the command history buffer size to
the default configuration, use the
440
exec-timeout
line console
exec-timeout
terminal history user EXEC mode command.
form of this command.
no
0 command.
20
no
form of this command.