Table of Contents
Advertisement
no stack display-order
Parameters
•
unit — Specifies the number of the unit displayed at the top.
top
(Range: 1-8)
•
unit — Specifies the number of the unit displayed at the bottom.
bottom
(Range: 1-8)
Default Setting
The master unit is displayed at the top.
Command Modes
Global Configuration mode
Command Usage
If the units are not adjacent in ring or chain topology, the units are not at the
edge and the default display order is used.
Example
This example displays unit 8 at the top of the display and unit 1 at the bottom.
config
Console#
Console(config)#
Related Commands
stack master
stack reload
show stack
show stack
The
User EXEC mode command displays information about the status
show stack
of a stack.
Syntax
[
show stack
unit
Parameters
• unit — Specifies the number of the unit. (Range: 1-8)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
stack display-order top
unit]
System Management Commands
bottom
8
1
4
615
Hide quick links:
Advertisement
Table of Contents
