4
Command Line Interface
show vlan multicast-tv
Use the show multicast-tv command to display information on the source ports and
receiver ports of multicast-tv vlan.
Syntax
show vlan multicast-tv vlan-id
Parameters
• vlan-id — VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Priviledged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures displays IPMP Snooping configuration.
show ip igmp multicast-tv
Console#
Source Ports
1/8, 1/9
The following table describes significant fields shown above:
Field
Source Ports
Receiver Ports
Related Commands
show interfaces switchport
690
of the Multicast TV VLAN
1000
Receiver Ports
2/1-18, 3/1-18, 4/1-18
Description
Ports that can transmit and receive traffic to the VLAN.
orts that can only receive traffic from the VLAN.
.