Tacacs-Server Host; Tacacs+ Commands - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

TACACS+ Commands

Command
tacacs-server hostt
tacacs-server key
tacacs-server
timeout
tacacs-server
source-ip
show tacacs

tacacs-server host

The
tacacs-server host
host. To delete the specified name or address, use the
Syntax
tacacs-server host
port-number] [
priority]
no tacacs-server host
Parameters
• ip-address — IP address of the TACACS+ server.
• hostname — Host name of the TACACS+ server.
(Range: 1 - 158 characters)
•
single-connection
device open and close a TCP connection to the daemon each time it must
communicate, the single-connection option maintains a single open
connection between the device and the daemon.
• port-number — Specifies a server port number. (Range: 0 - 65535)
• timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
• key-string — Specifies the authentication and encryption key for all
TACACS+ communications between the device and the TACACS+ server.
This key must match the encryption used on the TACACS+ daemon. To
specify an empty string, enter "". (Range: 0 - 128 characters)
• source — Specifies the source IP address to use for the communication.
0.0.0.0 indicates a request to use the IP address of the outgoing IP
622
Table 4-32. TACACS+ Commands
Function
Specifies a TACACS+ host. To delete the specified name or
address, use the no form of this command.
Sets the authentication encryption key used for all TACACS+
communications between the device and the TACACS+ daemon.
To disable the key, use the no form of this command.
Sets the interval during which the device waits for a TACACS+
server to reply. To return to the default configuration, use the no
form of this command.
Configures the source IP address to be used for communication
with TACACS+ servers. To return to the default configuration, use
the no form of this command.
Displays configuration and statistical information about a
TACACS+ server.
Global Configuration mode command specifies a TACACS+
{ip-address | hostname} [
timeout] [
timeout
{ip-address | hostname}
— Indicates a single-connection. Rather than have the
no
single-connection
key-string] [
key source
Mode
GC
GC
GC
GC
PE
form of this command.
] [
port
source] [
priority
Page
4-622
4-623
4-624
4-625
4-625