Logging Buffered - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Example
The following example limits logging messages displayed on the console to severity
level .
errors
Console(config)# logging console
Related Commands
logging
show logging

logging buffered

The
logging buffered
displayed from an internal buffer based on severity. To cancel using the buffer, use
the form of this command.
no
Syntax
logging buffered
no logging buffered
Parameters
• level — Specifies the severity level of messages logged in the buffer.
Possible values:
notifications, informational, debugging.
Default Setting
The default severity level is
Command Mode
Global Configuration mode
Command Usage
All the syslog messages are logged to the internal buffer. This command limits
the messages displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer
based on severity level
Console(config)# logging buffered
Related Commands
logging
clear logging
show logging
594
errors
Global Configuration mode command limits syslog messages
level
emergencies, alerts
informational
debugging .
debugging
, ,
critical errors, warnings
.
,