• Status — Indicates the connection status between the device and the TACACS+
server. The possible field values are:
• Connected — Indicates there is currently a connection between the device and
the TACACS+ server.
• Not Connected — Indicates there is not currently a connection between the
device and the TACACS+ server.
• Remove — Removes TACACS+ server. The possible field values are:
• Checked — Removes the selected TACACS+ server.
• Unchecked — Maintains the TACACS+ servers.
Web – Click System, WebViewMgmt, Authentication, TACACS+, define the fields,
and click Apply.
CLI – The following is an example of the TACACS+ CLI Commands:
Console(config)#
4-622
Console(config)#
4-623
Console(config)#
4-624
Console(config)#
4-625
Defining RADIUS Settings
Remote Authorization Dial-In User Service (RADIUS) servers provide additional
security for networks. RADIUS servers provide a centralized authentication method
for web access.
Figure 3-48. TACACS+ Page
tacacs-server host
tacacs-server key
tacacs-server timeout
tacacs-server source-ip
Configuring Authentication Methods
172.16.1.1
30
172.16.8.1
3
115