Chapter 2: Console Interface; Log-In Screen - Alcatel OmniStack 8008 User Manual

Chapter 2: Console Interface

Log-in Screen

Once a direct connection to the serial port or a Telnet connection is established, the
log-in screen for the onboard configuration program appears as shown below.
If this is your first time to log into the configuration program, then the default user
names are "admin" and "guest," with the password "switch." The Administrator has
Read/Write access to all configuration parameters and statistics, while the Guest
has Read Only access to the management program.
You should define a new administrator password, record it and put it in a safe place.
Select Console Login Configuration from the Management Setup Menu and enter a
new password for the administrator. Note that passwords can consist of up to 11
alphanumeric characters and are not case sensitive.
Note: You are allowed three attempts to enter the correct password; on the third failed
attempt the current connection is terminated.
Alcatel OmniStack 8008
Alcatel Internetworking
26801 West Agoura Road
Calabasas, CA, 91301
(818) 880-3500
Alcatel OmniStack
Copyright (c), 2000 Alcatel and its licensors.
All rights reserved.
OmniStack is a trademark of Alcatel registered in
the United States Patent and Trademark Office.
Username :
Password :
2-1