Sntp Unicast Client Poll - Alcatel OmniStack LS 6248 User Manual

Example
The following example enables the device to use the Simple Network Time Protocol
(SNTP) to request and accept SNTP traffic from servers.
Console(config)#
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key
sntp client poll timer
sntp broadcast client enable
sntp anycast client enable

sntp unicast client poll

sntp unicast client poll
The
sntp unicast client poll
for the Simple Network Time Protocol (SNTP) predefined unicast servers. To disable
the polling for SNTP client, use the
Syntax
sntp unicast client poll
no sntp unicast client poll
Default Setting
Polling is disabled.
Command Mode
Global Configuration mode
Command Usage
Polling time is determined by the
mode command.
Examples
The following example enables polling for Simple Network Time Protocol (SNTP)
predefined unicast clients.
Console(config)#
Related Commands
sntp authentication-key
sntp authenticate
sntp unicast client enable
Global Configuration mode command enables polling
form of this command.
no
sntp client poll timer
sntp unicast client poll
Clock Commands
Global Configuration
4
359