Alcatel OmniStack LS 6248 User Manual page 633

Command Usage
Telnet software supports special Telnet commands in the form of Telnet
sequences that map generic terminal control functions to operating
system-specific functions. To enter a Telnet sequence, press the escape
sequence keys (Ctrl-shift-6) followed by a Telnet command character.
Special Telnet Sequences
Telnet Sequence
Ctrl-shift-6-b
Ctrl-shift-6-c
Ctrl-shift-6-h
Ctrl-shift-6-o
Ctrl-shift-6-t
Ctrl-shift-6-u
At any time during an active Telnet session, Telnet commands can be listed by
pressing the Ctrl-shift-6-? keys at the system prompt.
A sample of this list follows. Note that the Ctrl-shift-6 sequence appears as ^^ on the
screen.
Console> 'Ctrl-shift-6' ?
[Special telnet escape help]
^^ B sends telnet BREAK
^^ C sends telnet IP
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
Ctrl-shift-6 x suspends the session (return to system command prompt)
Several concurrent Telnet sessions can be opened and switched. To open a
subsequent session, the current connection has to be suspended by pressing the
escape sequence keys (Ctrl-shift-6) and x to return to the system command prompt.
Then open a new connection with the
Keywords Table
Options
/echo
/quiet
/source-interface
Purpose
Break
Interrupt Process (IP)
Erase Character (EC)
Abort Output (AO)
Are You There? (AYT)
Erase Line (EL)
telnet
Description
Enables local echo.
Prevents onscreen display of all messages from the software.
Specifies the source interface.
System Management Commands
User EXEC mode command.
4
609