Lldp Med Enable; Lldp Med Network-Policy (Global) - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
port-desc, sys-name, sys-desc, sys-cap, 802.3-mac-phy.
(Range 1-8192 seconds)
Default Configuration
No optional TLV is transmitted.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no guidelines for this command.

lldp med enable

The lldp med enable Interface Configuration (Ethernet) mode command enables
the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) on an
interface. To disable LLDP MED on an interface, use the no form of this command.
Syntax
lldp med enable [tlv1 ... tlv3]
no lldp med enable
Parameters
• tlv — Specifies TLV that should be included. Available TLVs are:
network-policy, location, poe-pse. The capabilities TLV is always included
if LLDP-MED is enabled.
Default Configuration
The default configuration is disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no guidelines for this command.

lldp med network-policy (global)

The lldp med network-policy Global Configuration mode command defines the
LLDP MED network policy. To remove LLDP MED network policy, use the no form of
this command.
Syntax
lldp med network-policy number application [vlan id] [vlan-type {
untagged}][up priority] [dscp value]
no lldp med network-policy number
Parameters
• number — Network policy sequential number (Range: 1-32).
• application — The name or the number of the primary function of the
334
tagged
|