Snmp-Server Location - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Do not include spaces in the text string or place text that includes spaces
inside quotation marks.
Example
The following example configures the system contact point called
Alcatel_Technical_Support
console(config)# snmp-server contact Alcatel_Technical_Support
Related Commands
show snmp

snmp-server location

The snmp-server location Global Configuration mode command configures the
system location string. To remove the location string, use the
command.
Syntax
snmp-server location
no snmp-server location
Parameters
• text — Specifies a string that describes system location information.
(Range: 0-160 characters)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Do not include spaces in the text string or place text that includes spaces
inside quotation marks.
Example
The following example defines the device location as
Console(config)# snmp-server location New_York
530
.
text
form of this
no
New_York .