Login Authentication - Alcatel OmniStack LS 6248 User Manual

Command Usage
The default and optional list names created with the
command are used with the
The additional methods of authentication are used only if the previous method
returns an error, not if it fails. To ensure that the authentication succeeds even
if all methods return an error, specify
command line.
All
aaa authentication enable
or TACACS+ server include the username $enabx$., where x is the requested
privilege level.
Example
The following example sets the enable password for authentication when accessing
higher privilege levels.
Console(config)#
Related Commands
aaa authentication dot1x
aaa authentication login

login authentication

show authentication methods
login authentication
The
login authentication
authentication method list for a remote telnet or console. To return to the default
configuration specified by the
this command.
Syntax
login authentication
no login authentication
Parameters
• — Uses the default list created with the
default
command.
• list-name — Uses the indicated list created with the
command.
login
Default Setting
Uses the default set with the command
Command Mode
Line Configuration mode
enable authentication
default requests sent by the device to a RADIUS
aaa authentication enable default enable
Line Configuration mode command specifies the login
aaa authentication login
{ | list-name}
default
aaa authentication enable
command.
as the final method in the
none
command, use the
aaa authentication login
aaa authentication
aaa authentication login
4
AAA Commands
form of
no
.
291