Spanning-Tree Mode - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Default Setting
Spanning-tree is enabled.
Command Modes
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables spanning-tree functionality.
Console(config)# spanning-tree
Related Commands

spanning-tree mode

show spanning-tree
spanning-tree mode
The
spanning-tree mode
spanning-tree protocol. To return to the default configuration, use the
command.
Syntax
spanning-tree mode
no spanning-tree mode
Parameters
• — Indicates that the Spanning Tree Protocol (STP) is enabled.
stp
• — Indicates that the Rapid Spanning Tree Protocol (RSTP) is enabled.
rstp
• mstp — Indicates that the Multiple Spanning Tree Protocol (RSTP) is
enabled.
Default Setting
STP is enabled.
Command Modes
Global Configuration mode
Command Usage
In RSTP mode, the device uses STP when the neighbor device uses STP.
In MSTP mode, the device uses RSTP when the neighbor device uses RSTP
and uses STP when the neighbor device uses STP.
540
Global Configuration mode command configures the
{ | | }
stp rstp mstp
form of this
no