Aaa Authentication Dot1X - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command
dot1x timeout
server-timeout
show dot1x
show dot1x users
show dot1x statistics Displays 802.1X statistics for the specified interface.
dot1x auth-not-req
dot1x multiple-hosts Enables multiple hosts (clients) on an 802.1X-authorized port,
dot1x
single-host-violation
dot1x guest-vlan
dot1x guest-vlan
enable
dot1x
mac-authentication
show dot1x
advanced

aaa authentication dot1x

The
aaa authentication dot1x
more authentication, authorization, and accounting (AAA) methods for use on
interfaces running IEEE 802.1X. To return to the default configuration, use the
form of this command.
Syntax
aaa authentication dot1x default
no aaa authentication dot1x default
Parameters
• method1 [method2...] — At least one from the following table:
Keyword
Radius
None
264
Table 4-5. 802.1x Commands
Function
Sets the time that the device waits for a response from the
authentication server. To return to the default configuration, use
the no form of this command
Displays the 802.1X status of the device or specified interface
Displays active 802.1X authenticated users for the device.
Enables unauthorized devices access to the VLAN. To disabled
access to the VLAN, use the no form of this command.
where the authorization state of the port is set to auto. To return
to the default configuration, use the no form of this command
Configures the action to be taken, when a station whose MAC
address is not the supplicant MAC address, attempts to access
the interface. Use the no form of this command to return to
default.
Defines a guest VLAN. To return to the default configuration, use
the no form of this command.
Enables unauthorized users on the interface access to the Guest
VLAN. To disable access, use the no form of this command.
Enables authentication based on the station's MAC address
Displays 802.1X advanced features for the device or specified
interface
Global Configuration mode command specifies one or
Description
Uses the list of all RADIUS servers for authentication
Uses no authentication
method1 [method2...]
Mode Page
ICE 4-273
PE 4-274
PE 4-277
PE 4-279
ICV 4-281
ICE 4-282
ICE 4-283
ICV 4-284
ICE 4-285
ICE 4-285
PE 4-286
no