(Range: 1-32 characters)
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures an access list called mlist as the management
access list.
Console(config)#
Related Commands
management access-list
show management access-class
show management access-list
The
show management access-list
management access-lists.
Syntax
show management access-list
Parameters
• name — Specifies the name of a management access list.
(Range: 1 - 32 characters)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the mlist management access list.
show management access-list
Console#
mlist
-----
permit ethernet 1/e1
management access-class
Privileged EXEC mode command displays
[name]
Management ACL Commands
mlist
mlist
4
449