Alcatel OmniStack LS 6248 User Manual page 735

12. To configure the QinQ uplink, configure port e4 as a trunked port, tagged for
VLANs 1001, 1048, 3000 and 3001.
Console (Config)# interface ethernet e4
Console (config-if)# switchport mode trunk
Console (config-if)# switchport trunk allowed vlan add 1001
Console (config-if)# switchport trunk allowed vlan add 1048
Console (config-if)# switchport trunk allowed vlan add 3000
Console (config-if)# switchport trunk allowed vlan add 3001
13. View the configuration.
Console# show ip igmp snooping cpe vlans
CPE VLAN
--------
3
3
To configure triple play using the Webview, perform the following:
1. Click Layer 2 > VLAN > VLAN > Basic Information. The VLAN Basic
Information Page opens.
2. Click .
The Add VLAN Membership Page opens:
Multicast-TV VLAN
------------------
1118
1119
-711