Sntp Broadcast Client Enable - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Example
The following example sets the polling time for the Simple Network Time Protocol
(SNTP) client to 120 seconds.
Console(config)#
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key

sntp broadcast client enable

sntp anycast client enable
sntp unicast client enable
sntp unicast client poll
sntp broadcast client enable
The
sntp broadcast client enable
Simple Network Time Protocol (SNTP) broadcast clients. To disable SNTP
broadcast clients, use the
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Setting
The SNTP broadcast client is disabled.
Command Mode
Global Configuration mode
Command Usage
Use the sntp client enable (Interface)
to enable the SNTP client on a specific interface.
Examples
The following example enables the SNTP broadcast clients.
Console(config)# sntp broadcast client enable
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key
356
sntp client poll timer
Global Configuration mode command enables
form of this command.
no
120
Interface Configuration mode command