Name; Map Protocol Protocols-Group - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
show vlan

name

The Interface Configuration mode command adds a name to a VLAN. To
name
remove the VLAN name, use the
Syntax
string
name
no name
Parameters
• string — Unique name to be associated with this VLAN.
(Range: 1-32 characters)
Default Setting
No name is defined.
Command Mode
Interface Configuration (VLAN) mode. Cannot be configured for a range of
interfaces (range context).
Command Usage
There are no user guidelines for this command.
Example
The following example gives VLAN number 19 the name
Console(config)# interface vlan 19
Console(config-if)# name Marketing
Related Commands
vlan database
vlan
show vlan

map protocol protocols-group

The map protocol protocols-group
to a group of protocols. Use the
Syntax
map protocol
no map protocol
Parameters
- protocol — The protocol is 16 bits protocol number or one of the reserved
names that are defined in the usage guidelines. (Range: 0x0000 – 0x0600)
666
form of this command.
no
VLAN Configuration command maps a protocol
form of this command to delete the map.
no
protocol [encapsulation]
protocol [encapsulation]
Marketing
group
protocols-group
.