show radius-servers
radius-server key
The
radius-server key
and encryption key for all RADIUS communications between the device and the
RADIUS daemon. To return to the default configuration, use the
command.
Syntax
radius-server key
no radius-server key
Parameters
• key-string — Specifies the authentication and encryption key for all
RADIUS communications between the device and the RADIUS server. This
key must match the encryption used on the RADIUS daemon.
(Range: 0-128 characters)
Default Setting
The key-string is an empty string.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example defines the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
Console(config)# radius-server key alcatel-server
Related Commands
radius-server host
radius-server retransmit
radius-server source-ip
radius-server timeout
radius-server deadtime
show radius-servers
radius-server retransmit
The
radius-server retransmit
number of times the software searches the list of RADIUS server hosts. To reset the
default configuration, use the
Global Configuration mode command sets the authentication
[key-string]
Global Configuration mode command specifies the
no
form of this command.
RADIUS Commands
form of this
no
4
497