Defining Mac Based Access Control Lists; Figure 3-78. Ip Based Acl Page - Alcatel OmniStack LS 6248 User Manual

Apply.
CLI – The following is an example of the IP Based ACLs CLI commands:
Console(config)#
4-300
Console(config-ip-al)#
4-304
Console(config-ip-al)#
4-304

Defining MAC Based Access Control Lists

The MAC Based ACL Page allows a MAC- based ACL to be defined. ACEs can be
added only if the ACL is not bound to an interface.
Command Attributes
• ACL Name — Displays the user-defined MAC based ACLs.
• Remove ACL — Removes the MAC based ACLs. The possible field values are:
• Checked — Removes the selected MAC based ACL.
• Unchecked — Maintains the MAC based ACLs.
• Priority— Indicates the ACE priority, which determines which ACE is matched to
a packet on a first-match basis. The possible field values are 1-2147483647.
• Source MAC Address — Defines the source MAC address, to which packets are
addressed to the ACE.
• Source MAC Mask — Defines the source MAC address wildcard mask. Wild cards
are used to mask all or part of a source MAC address. Wild card masks specify

Figure 3-78. IP Based ACL Page

ipaccess-list
permit
rsvp 192.1.1.1 0.0.0.0
deny
rsvp 192.1.1.1 0.0.0.255
Defining Access Control Lists
ip-acl1
any dscp
56
any
3
171