Ip Source-Guard Tcam Locate; Show Ip Source-Guard - Alcatel OmniStack LS 6248 User Manual

Example
The following example globally sets the TCAM resources retry frequency to 50
seconds.
Console # (config)# ip source-guard tcam retries-freq 50
Console # (config)#

ip source-guard tcam locate

The ip source-guard tcam locate Privileged EXEC mode command manually
retries to locate TCAM resources for inactive IP source guard addresses.
Syntax
ip source-guard tcam locate
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Since the IP source guard uses the Ternary Content Addressable Memory
(TCAM) resources, there may be situations where IP source guard addresses
are inactive because of lack of TCAM resources.
By default, every minute the software conducts a search for available space in
the TCAM for the inactive IP source guard addresses.
The ip source-guard tcam retries-freq Global Configuration mode command
disables automatic retries for TCAM space, and manually retries locating
TCAM resources for the inactive IP source guard addresses.
The show ip source-guard inactive EXEC mode command displays the
inactive IP source guard addresses.
Example
The following example retries to locate TCAM resources for inactive IP source guard
addresses.
Console # ip source-guard tcam locate
Console #

show ip source-guard

The show ip source-guard EXEC mode command displays the IP source guard
configuration.
Syntax
show ip source-guard [mac-address mac-address] [ip-address ip-address]
[vlan vlan] [ethernet interface | port-channel port-channel-number]
DHCP Snooping, IP Source Guard and ARP Inspection Commands
4
643