Snmp-Server User - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example attaches a group called user-group to SNMPv3 and assigns
to the group the privacy security level and read access rights to a view called
user-view.
Console(config)#
Related Commands
show snmp
show snmp groups

snmp-server user

The
snmp-server user
SNMP Version 3 user. To remove a user, use the
Syntax
snmp-server user
password
| auth-sha
sha-des-keys
no snmp-server user
Parameters
• username — Specifies the name of the user on the host that connects to
the agent. (Range: 1-30 characters)
• groupname — Specifies the name of the group to which the user belongs.
(Range: 1-30 characters)
• engineid-string — Specifies the engine ID of the remote SNMP entity to
which the user belongs. The engine ID is a concatenated hexadecimal
string. Each byte in the hexadecimal character string is two hexadecimal
digits. Each byte can be separated by a period or colon.
(Range: 5-32 characters)
• auth-md5 password — Indicates the HMAC-MD5-96 authentication level.
The user should enter a password for authentication and generation of a
DES key for privacy. (Range: 1-32 characters)
•
auth-sha
The user should enter a password for authentication and generation of a
DES key for privacy. (Range: 1-32 characters)
•
auth-md5-key
authentication level. The user should enter a concatenated hexadecimal
string of the MD5 key (MSB) and the privacy key (LSB). If authentication is
522
snmp-server group
Global Configuration mode command configures a new
username groupname
password
| auth-md5-key
]
username
[remote
password — Indicates the HMAC-SHA-96 authentication level.
md5-des-keys — Indicates the HMAC-MD5-96
v3 priv read
user-group
form of this command.
no
engineid-string
[remote
md5-des-keys
engineid-string
]
user-view
] [ auth-md5
| auth-sha-key