Name (Mst); Revision (Mst) - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

name (mst)

The Configuration mode command defines the configuration name. To
name MST
return to the default setting, use the no form of this command.
Syntax
string
name
no name
Parameters
• string — MST configuration name. Case-sensitive (Range: 1-32
characters).
Default Setting
The default name is a bridge ID.
Command Mode
MST Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
Console(config) #
Console(config-mst) #
Related Commands
spanning-tree mst priority
spanning-tree mst max-hops
spanning-tree mst port-priority
spanning-tree mst cost
spanning-tree mst configuration
instance (mst)

revision (mst)

show (mst)
exit (mst)
abort (mst)
show spanning-tree
revision (mst)
The
revision MST
number. To return to the default configuration, use the
558
spanning-tree mst configuration
name
region 1
configuration command defines the configuration revision
no form of this command.