Ssh Commands - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

SSH Commands

Command
ip ssh port
ip ssh server
crypto key generate
dsa
crypto key generate
rsa
ip ssh pubkey-auth
crypto key
pubkey-chain ssh
user-key
key-string
show ip ssh
show crypto key
mypubkey
show crypto key
pubkey-chain ssh
ip ssh port
The Global Configuration mode command specifies the port to be used
ip ssh port
by the SSH server. To return to the default configuration, use the
command.
Syntax
port-number
ip ssh port
no ip ssh port
Parameters
• port-number — Port number for use by the SSH server (Range: 1 - 65535).
Default Setting
The default port number is 22.
Command Mode
Global Configuration mode
580
Table 4-29. SSH Commands
Function
Specifies the port to be used by the SSH server. To return to the
default configuration, use the no form of this command.
Enables the device to be configured from a SSH server. To disable
this function, use the no form of this command.
Generates DSA key pairs.
Generates RSA key pairs.
Enables public key authentication for incoming SSH sessions. To
disable this function, use the no form of this command.
Enters the SSH Public Key-chain Configuration mode. The mode
is used to manually specify other device public keys such as SSH
client public keys.
Specifies which SSH public key is manually configured. To
remove an SSH public key, use the no form of this command.
Manually specifies an SSH public key.
Displays the SSH server configuration.
Displays the SSH public keys on the device.
Displays SSH public keys stored on the device.
Mode Page
GC 4-580
GC 4-581
GC 4-581
GC 4-582
GC 4-583
GC 4-584
SPK 4-585
SPK 4-586
PE 4-587
PE 4-588
PE 4-589
form of this
no