Example
The following example disables Ethernet port 1/e5 operations.
Console(config)#
Console(config-if)#
The following example restarts the disabled Ethernet port.
Console(config)#
Console(config-if)#
Related Commands
speed
duplex
negotiation
flowcontrol
mdix
back-pressure
show interfaces configuration
show interfaces status
description
The
Interface Configuration (Ethernet, port-channel) mode command
description
adds a description to an interface. To remove the description, use the
command.
Syntax
string
description
no description
Parameters
• string — Comment or a description of the port to enable the user to
remember what is attached to the port. (Range: 1-64 characters)
Default Setting
The interface does not have a description.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
interface ethernet
shutdown
interface ethernet
no shutdown
Ethernet Configuration Commands
1/e5
1/e5
4
form of this
no
379