Show Bridge Address-Table - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port 1/e1.
Console(config)#
Console(config-if)#
66:66:66:66:66:66
Related Commands
show ports security addresses

show bridge address-table

The
show bridge address-table
entries in the bridge-forwarding database.
Syntax
show bridge address-table
port-channel-number]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
Internal usage VLANs (VLANs that are automatically allocated on ports with a
defined Layer 3 interface) are presented in the VLAN column by a port number
and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically
learned are displayed in the MAC address table. This includes, for example,
MAC addresses defined in ACLS.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
show bridge address-table
Console#
Aging time is 300 sec
interface
324
interface ethernet
port security routed secure-address
Privileged EXEC mode command displays all
[
vlan
mac address
1/e1
vlan] [ interface |
ethernet
Port
port-channel
Type