Viewing The Rmon History Table; Figure 3-51. History Control Page - Alcatel OmniStack LS 6248 User Manual

CLI – The following is an example of the CLI commands used to view RMON History
Control statistics:
Console(config)# interface ethernet 1/e1
4-376
Console(config-if)# rmon collection history 1 interval 2400
4-506

Viewing the RMON History Table

The History Table Page contains interface specific statistical network samplings.
Each table entry represents all counter values compiled during a single sample.
Command Attributes
• History Entry No. — Displays the entry number for the History Control Table page.
• Owner — Displays the RMON station or user that requested the RMON
information. The field range is 0-20 characters.
• Sample Number— Indicates the sample number from which the statistics were
taken.
• Drop Events — Displays the amount of dropped events on the device.
• Received Bytes (Octets) — Displays the number of octets received on the
interface since the device was last refreshed. This number includes bad packets
and FCS octets, but excludes framing bits.
• Received Packets — Displays the number of packets received on the interface
since the device was last refreshed, including bad packets, Multicast and
Broadcast packets.

Figure 3-51. History Control Page

Managing RMON Statistics
3
121