Specifying Static Interfaces For A Multicast Group; Figure 3-112. Igmp Snooping Page - Alcatel OmniStack LS 6248 User Manual

CLI – The following is an example of the IGMP CLI commands:
console(config)# bridge multicast filtering
4-315
console(config)# ip igmp snooping
4-408

Specifying Static Interfaces for a Multicast Group

The Multicast Group Page displays the ports and LAGs attached to the Multicast
service group in the Ports and LAGs tables. The Port and LAG tables also reflect the
manner in which the port or LAGs joined the Multicast group. Ports can be added
either to existing groups or to new Multicast service groups. The Multicast Group
Page permits new Multicast service groups to be created. The Multicast Group Page
also assigns ports to a specific Multicast service address group.
The IGMP port and LAG members management settings are:
• D — Dynamically joins ports/LAG to the Multicast group in the Current Row.
• S — Attaches the port to the Multicast group as static member in the Static Row.
The port/LAG has joined the Multicast group statically in the Current Row.
• F — Forbidden ports are not included the Multicast group, even if IGMP snooping
designated the port to join a Multicast group.
• N — The port is not attached to a Multicast group.
Command Attributes
• Enable Bridge Multicast Filtering — Indicate if bridge Multicast filtering is
enabled on the device. The possible field values are:

Figure 3-112. IGMP Snooping Page

3
Multicast Filtering
225