Igmp Snooping Commands; Ip Igmp Snooping (Global) - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

IGMP Snooping Commands

Command
ip igmp snooping
(Global)
ip igmp snooping
(Interface)
ip igmp snooping
host-time-out
ip igmp snooping
mrouter-time-out
ip igmp snooping
leave-time-out
ip igmp snooping
multicast-tv
ip igmp snooping
querier enable
ip igmp snooping
querier enable
ip igmp snooping
querier address
ip igmp snooping
querier version
show ip igmp
snooping interface
show ip igmp
snooping groups

ip igmp snooping (Global)

The
ip igmp snooping
Management Protocol (IGMP) snooping. To disable IGMP snooping, use the
form of this command.
408
Table 4-15. IGMP Snooping Commands
Function
Enables Internet Group Management Protocol (IGMP) snooping.
To disable IGMP snooping, use the no form of this command.
Enables Internet Group Management Protocol (IGMP) snooping
on a specific VLAN. To disable IGMP snooping on a VLAN
interface, use the no form of this command.
Configures the host-time-out. If an IGMP report for a multicast
group was not received for a host-time-out period from a specific
port, this port is deleted from the member list of that multicast
group. To return to the default configuration, use the no form of
this command.
Configures the mrouter-time-out. The ip igmp snooping
mrouter-time-out Interface Configuration (VLAN) mode
command is used for setting the aging-out time after multicast
device ports are automatically learned. To return to the default
configuration, use the no form of this command.
Configures the leave-time-out. If an IGMP report for a multicast
group was not received for a leave-time-out period after an IGMP
Leave was received from a specific port, this port is deleted from
the member list of that multicast group. To return to the default
configuration, use the no form of this command.
Defines the multicast ip-addresses that are associated with a
multicast-tv VLAN
Displays information on dynamically learned multicast device
interfaces.
Use the ip igmp snooping querier enable interface configuration
command to enable Internet Group Management Protocol (IGMP)
querier on a specific VLAN.
Use the ip igmp snooping querier address interface configuration
command to define the source IP address that the IGMP
Snooping querier would use.
Use the ip igmp snooping querier version interface configuration
command to configure the IGMP version of an IGMP querier on a
specific VLAN.
Sets the number of data bits per character that are interpreted and
generated by hardware
Displays multicast groups learned by IGMP snooping.
Global Configuration mode command enables Internet Group
Mode Page
GC 4-408
ICV 4-409
ICV 4-410
ICV 4-410
ICV 4-411
GC 4-412
UE 4-413
ICV 4-413
ICV 4-413
ICV 4-414
UE 4-415
UE 4-416
no