You cannot specify an engine ID that consists of all 0x0, all 0xF or
0x000000001.
The
show running-config
the SNMP engine ID configuration. To see the SNMP engine ID configuration,
enter the
snmp-server engineID local
Example
The following example enables SNMPv3 on the device and sets the local engine ID
of the device to the default value.
Console(config) #
Related Commands
show snmp engineid
snmp-server enable traps
The snmp-server enable traps Global Configuration mode command enables the
device to send SNMP traps. To disable SNMP traps, use the no form of the
command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Setting
SNMP traps are enabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables SNMP traps.
Console(config)# snmp-server enable traps
Related Commands
show snmp
snmp-server filter
The
snmp-server filter
Simple Network Management Protocol (SNMP) server filter entry. To remove the
specified SNMP server filter entry, use the
Syntax
snmp-server filter
Privileged EXEC mode command does not display
snmp-server engineID local default
Global Configuration mode command creates or updates a
filter-name oid-tree {
GlobalConfiguration mode command.
form of this command.
no
included | excluded
4
SNMP Commands
}
525