Rate-Limit - Alcatel OmniStack LS 6248 User Manual

Os-ls-6200 series
Hide thumbs Also See for OmniStack LS 6248:
Table of Contents

Advertisement

Syntax
class-map-name [
class
class-map-name
no class
Parameters
• class-map-name — Specifies the name of an existing class map. If the
class map does not exist, a new class map will be created under the
specified name.
• acl-name — Specifies the name of an IP or MAC ACL.
Default Setting
No policy map is defined.
Command Mode
Policy-map Configuration mode
Command Usage
Before modifying a policy for an existing class or creating a policy for a new
class, use the
name of the policy map to which the policy belongs and to enter the
Policy-map Configuration mode.
Example
The following example defines a traffic classification called class1 with an
access-group called Alcatel. The class is in a policy map called policy1.
Console(config)# policy-map policy1
Console (config-pmap)# class class1 access-group Alcatel

rate-limit

The
interface configuration command limits the rate of the incoming traffic.
rate-limit
The
form of this command is used to disable rate limit.
no
Syntax
rate
rate-limit
no rate-limit
Parameters
• rate — Maximum of kilobits per second of ingress traffic on a port.
(Range: 62K - 100M)
Default Setting
1000 Kbits/Sec
Command Mode
Interface configuration (Ethernet)
access-group
policy-map
Global Configuration mode command to specify the
acl-name]
4
QoS Commands
473

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents