Logging - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Syntax
logging on
no logging on
Default Setting
Logging is enabled.
Command Mode
Global Configuration mode
Command Usage
The logging process controls the distribution of logging messages at various
destinations, such as the logging buffer, logging file or syslog server. Logging
on and off at these destinations can be individually configured using the
logging buffered
commands. However, if the
are sent to these destinations. Only the console receives messages.
Example
The following example enables logging error messages.
Console(config)# logging on
Related Commands
show logging
show syslog-servers

logging

The Global Configuration mode command logs messages to a syslog
logging
server. To delete the syslog server with the specified address from the list of syslogs,
use the form of this command.
no
Syntax
{ip-address | hostname} [
logging
[
description
{ip-address | hostname}
no logging
Parameters
• ip-address — IP address of the host to be used as a syslog server.
• hostname — Specifies the host name of the syslog server.
(Range: 1-158 characters)
• port — Specifies the port number for syslog messages. (Range: 1 - 65535)
• level — Specifies the severity level of logged messages sent to the syslog
servers. Possible values:
notifications, informational
• facility — Specifies the facility that is indicated in the message. Possible
592
, , and
logging file
logging on
text]
emergencies, alerts
Global Configuration mode
logging
command is disabled, no messages
port] [
port severity
,
and .
debugging
level] [ facility]
facility
,
critical errors, warnings
,