Dot1X System-Auth-Control - Alcatel OmniStack LS 6248 User Manual

Default Setting
No authentication method is defined.
Command Mode
Global Configuration
Command Usage
Additional methods of authentication are used only if the previous method
returns an error and not if the request for authentication is denied. To ensure
that authentication succeeds even if all methods return an error, specify
as the final method in the command line.
The RADIUS server must support MD-5 challenge and EAP type frames.
Example
The following example uses the
authentication.
Console(config)#
Related Commands
aaa authentication enable

dot1x system-auth-control

The
dot1x system-auth-control
802.1x globally. To return to the default configuration, use the
command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
802.1x is disabled globally.
Command Modes
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally.
Console(config)#
Related Commands
dot1x re-authentication
aaa authentication dot1x default
aaa authentication dot1x default
Global Configuration mode command enables
dot1x system-auth-control
802.1x Commands
none
command with no
none
form of this
no
4
265