Ip Arp Inspection List Create - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
on both ARP requests and responses.
• Destination MAC: Compare the destination MAC address in the Ethernet
header against the target MAC address in ARP body. This check is
performed for ARP responses.
• IP addresses: Compare the ARP body for invalid and unexpected IP
addresses. Addresses include 0.0.0.0, 255.255.255.255, and all IP
multicast addresses.
Example
The following example validates ARP inspection.
Console # (config)# ip arp inspection validate
Console # (config)#

ip arp inspection list create

The ip arp inspection list create Global Configuration mode command creates a
static ARP binding list and to enter the ARP list configuration mode. To delete the
list, use the no form of this command.
Syntax
ip arp inspection list create name
no ip arp inspection list create name
Parameters
• name — Specifies the list name. (Range: 1-32 characters)
Default Configuration
No static ARP binding list exists.
Command Mode
Global Configuration mode
User Guidelines
This command enables static ARP inspection on a VLAN.
Example
The following example creates the static ARP binding list arplist.
Console # (config)# ip arp inspection list create arplist
Console # (config-arp-list)#
ip mac
The ip mac ARP-list Configuration mode command displays static ARP binding. To
delete a binding, use the no form of this command.
Syntax
ip ip-address mac mac-address
648