Show Qos Interface - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Related Commands
qos map policed-dscp
qos map dscp-queue

show qos interface

The show qos interface
(QoS) information on the interface.
Syntax
show qos interface [buffers | queueing | policers | shapers | rate-limit]
[ethernet interface-number | vlan vlan-id | port-channel number]
Parameters
•
buffers
interface level.
•
queuing
interface level.
•
policers
interface level.
•
shapers
interface leve.
• rate limit — Display quality of service (QoS) rate-limit information at the
interface leve.
• ethernet interface-number — Specify port for which QoS information will be
displayed.
• vlan vlan-id — Vlan number.
• port-channel number — Specify port channel to which QoS information is
directed.
Default Setting
There is no default configuration for this command.
Command Mode
User EXEC mode
Command Usage
If no keyword is specified, port QoS QoS mode (for example, DSCP trusted,
CoS trusted, untrusted), default CoS value, DSCP-to-DSCP-mutation map
attached to the port, and policy map attached to the interface are displayed.
If no interface is specified, QoS information about all interfaces is displayed.
Example
The following example displays the buffer settings for queues on Ethernet port 1/e1.
show qos interface ethernet
Console#
Ethernet 1/e1
484
User EXEC mode command displays Quality of Service
— Display quality of service (QoS) buffers information at the
— Display quality of service (QoS) queuing information at the
— Display quality of service (QoS) policers information at the
— Display quality of service (QoS) shapers information at the
buffers
1/e1