3
Configuring the Switch
• Remove — Deletes the currently selected recipient. The possible field values are:
• Checked — Removes the selected recipient from the list of recipients.
• Unchecked — Maintains the list of recipients.
Web – Click SNMP, Trap Management, Trap Station Management. Define the fields
and click Add.
Figure 3-38. SNMP Trap Station Management Page
CLI – The following is an example of the SNMP Recipient commands:
Console(config)# snmp-server host 10.1.1.1 management 2
Defining SNMP Notification Global Parameters
The SNMP Global Trap Settings Page contains parameters for enables you to define
SNMP notification parameters.
Command Attributes
• Enable SNMP Notifications — Specifies whether the device can send SNMP
notifications. The possible field values are:
• Checked — Enables SNMP notifications.
• Unchecked — Disables SNMP notifications.
• Enable Authentication Notifications — Specifies whether SNMP authentication
failure notification is enabled on the device. The possible field values are:
• Checked — Enables the device to send authentication failure notifications.
• Unchecked — Disables the device from sending authentication failure
notifications.
Web - Click System, SNMP, Trap Management, Global Trap Settings. Define the
98