3
Configuring the Switch
maps:
Console(config)# policy-map policy1
4-472
Console(config-pmap)# class class1
Console(config-pmap-c)# police 124000 9600 exceed-action drop
Defining Tail Drop
The Tail Drop Page permits network managers to set the device to drop packets
which exceed the threshold size. Tail drop is only configurable on Giga Ethernet
ports. Tail Drop is configured per queue.
Command Attributes
• Queue No. — Indicates the traffic queue for which the tail drop settings are
defined.
• Threshold (0-100) — Defines the bandwidth amount after which packets are
dropped.
Web – Click Policy, Advanced Mode, Policy Map, Tail Drop. Define the fields, and
click Apply.
Viewing the Policy Table
The Policy Table Page provides parameters for defining policies.
248
Figure 3-128. Tail Drop Page
4-472
4-477