Figure 3-30. Arp Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
• All — Clears all ARP entries.
• Dynamic — Clears only dynamic ARP entries.
• Static — Clears only static ARP entries.
• Interface — Displays the interface type for which ARP parameters are displayed.
The possible field values are:
• Port — The port for which ARP parameters are defined.
• LAG — The LAG for which ARP parameters are defined.
• VLAN — The VLAN for which ARP parameters are defined.
• IP Address — Indicates the station IP address, which is associated with the MAC
address filled in below.
• MAC Address — Displays the station MAC address, which is associated in the
ARP table with the IP address.
• Status — Displays the ARP table entry type. Possible field values are:
• Dynamic — The ARP entry is learned dynamically.
• Static — The ARP entry is a static entry.
• Remove — Removes a specific ARP entry. The possible field values are:
• Checked — Removes the selected ARP entries.
• Unchecked — Maintains the current ARP entries.
Web — Click System, IP Addressing, IP Addressing, ARP, define the fields, and
specify a primary interface. Click Apply.
84

Figure 3-30. ARP Page