Command Attributes
• Aggregate Policer — User-defined aggregate policers.
• Ingress Committed Information Rate (CIR) — CIR in bits per second. This field
is only relevant when the Police value is Single.
• Ingress Committed Burst Size (CBS) — CBS in bytes per second. This field is
only relevant when the Police value is Single.
• Exceed Action — Action assigned to incoming packets when limits (CIR) are
exceeded. This field is only relevant when the Police value is Single. Possible
values are:
• Drop — Drops packets exceeding the defined CIR value.
• Remark DSCP — Remarks packets' DSCP values exceeding the defined CIR
value.
• None — Forwards packets exceeding the defined CIR value.
• Remove — Removes policies. The possible field values are:
• Checked — Removes the selected policy.
• Unchecked — Maintains the selected policy.
Web – Click Policy, Advanced Mode, Policy Map, Aggregate Policer. Define the
fields and click Apply.
CLI – The following is an example of the CLI commands used for defining policy
Figure 3-127. Aggregate Policer Page
Configuring Quality of Service
3
247