Password; Enable Password - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
enable authentication
ip http authentication
ip https authentication

password

The Line Configuration mode command specifies a password on a line.
password
To remove the password, use the
Syntax
password [
password
no password
Parameters
• password — Password for this level (Range: 1-159 characters).
•
encrypted
device configuration.
Default Setting
No password is defined.
Command Mode
Line Configuration mode
Command Usage
If a password is defined as encrypted, the required password length is 32
characters.
Example
The following example specifies password
Console(config)#
Console(config-line)#
Related Commands
show privilege

enable password

The
enable password
to control access to user and privilege levels. To remove the password requirement,
use the form of this command.
no
Syntax
enable password
no enable password
Parameters
• password — Password for this level (Range: 1-159 characters).
296
form of this command.
no
]
encrypted
— Encrypted password to be entered, copied from another
line console
password
secret
Global Configuration mode command sets a local password
[ level] password [
level
[ level]
level
secret on a console.
]
encrypted