Snmp-Server Community - Alcatel OmniStack LS 6248 User Manual

snmp-server community

The snmp-server community Global Configuration mode command configures the
community access string to permit access to the SNMP protocol. To remove the
specified community string, use the
Syntax
snmp-server community
view-name]
snmp-server community-group
no snmp-server community
Parameters
• community — Community string that acts like a password and permits
access to the SNMP protocol. (Range: 1-20 characters)
• — Indicates read-only access (default).
ro
• —Indicates read-write access.
rw
• —Indicates SNMP administrator access.
su
• ip-address — Specifies the IP address of the management station.
• group-name — Specifies the name of a previously defined group. A group
defines the objects available to the community. (Range: 1-30 characters)
• view-name — Specifies the name of a previously defined view. The view
defines the objects available to the community. (Range: 1-30 characters)
Default Setting
No communities are defined.
Command Mode
Global Configuration mode
Command Usage
The
view-name
whole MIB.
The
view-name
community string. When it is specified:
An internal security name is generated.
The internal security name for SNMPv1 and SNMPv2 security models is
mapped to an internal group name.
The internal group name for SNMPv1 and SNMPv2 security models is
mapped to a view-name (read-view and notify-view always, and for
write-view also)
The
group-name
community string. When it is specified:
An internal security name is generated.
form of this command.
no
community [
community group-name [ip-address]
community [ip-address]
parameter cannot be specified for
parameter can be used to restrict the access rights of a
parameter can also be used to restrict the access rights of a
| | ] [ip-address][
ro rw su
, which has access to the
su
4
SNMP Commands
view
for
rw
519